| Brand | Yato |
| Entity responsible for this product in the EU | TOYA S.A.More |
| Series | GRD |
| Color | blue |
| Protection category | II |
| Size | 53-64 cm |
| Material | ABS |
| Type of | DT-D028 |
| Standard | EN 397:2012 + A1:2012 |
| Symbol | YT-73974 |
The protective helmet made of durable ABS plastic was designed for the highest comfort of use. Universal size with adjustable in the range of 53 to 64 cm. Special gaps on the sides with a width of 29 mm allow the installation of dedicated anti-brash earmicks, e.g. YT-74624. Elements that increase the comfort of work from polyethylene with a six -point support made of upholstery tape, special material with a sponge and a teach means that the helmet almost does not feel the size of the size adjustment using a bolt with a bolt with a ratchet system allows you to adjust the size directly on the head of the user elastic chin strap with adjustable length adjustment , attached directly to the truss instead of the helmet not only prevents accidental sliding, but also allows the truss to be properly cushioned. Ventilation holes in the helmet shell improve air circulation The use of helmets white helmet - construction manager, construction engineer, supervision inspector, other engineers (e.g. environment) Yellow - a manual worker red helmet - guest, intern, practitioner blue helmet - working at heights, machine operator, electrician, Energetyk Green helmet - OSH employee orange helmet - surveyor, surveyor employee
Usage warnings:
To provide adequate protection, a helmet should either fit or be sized to fit the wearer's head. A helmet is made to absorb the energy of an impact, undergoing partial destruction or damage to the shell or visor, often unnoticeable. A helmet that has been subjected to a severe impact should be replaced.
Warning. It is forbidden to modify or remove original helmet components or replace them with parts other than those recommended by the manufacturer. The helmet should not be adapted, for the purpose of installing accessories, in any other way than recommended by the manufacturer. Paints, solvents, adhesives and adhesive labels should not be applied to the helmet except as recommended by the manufacturer.
