| Brand | Vorel |
| Entity responsible for this product in the EU | TOYA S.A.More |
| Series | GRD |
| Length | 20 cm |
| Type | water, schlaufwaga |
| Diameter | 10 mm |
| Material | PVC |
| Set includes | snake, measuring cup x2 |
| Symbol | 16001 |
Water leveler with a length of 20 m, the so-called shlauchwaga or shlaufwaga. It is designed for leveling distant points. Particularly useful for determining the level over long distances in construction, masonry and earthworks, for example, when leveling windows or window sills located in adjacent rooms.
- Measuring cups with clear graduations made of unbreakable plastic
- leak-proofplugs to prevent water from flowing out at the place where measurements are taken
Directions for use:
- Fill the hose with water without air bubbles, almost to full (leave air columns of about 5 - 10 cm in the ends of the hose).
- Hold the ends of the hose at an even height. Leave the water level to level freely. Mark both water surface levels on the hose (1+2).
- Attach the end plugs. These will prevent water from flowing into the measurement area. Once the measurement levels are reached, remove the end plugs.
Note: In case of water loss, refill and adjust the device.
